Picklex 20 logo on a white background.

The online store is under maintenance.
You may send your orders by sending us an email at: rsen@icpi.net

Replacing Alodine & Wash Primer with Chromate

Replacing Alodine & Wash Primer with Chromate

Replacing Alodine (Chromate Conversion Coating) and Wash Primer with Chromate before Liquid Painting: Performs complete Surface Preparation & Pre-treatment in One Step Process, exceeding the quality requirements of Major companies Picklex® 20 replaces Alodine (Chromate Conversion coating) and Wash Primer with Chromate. Exceeded 1000 hours of Salt spray test in Replacing Wash Primer with Chromate. Exceeded Quality requirement in replacing Alodine for Goodrich Aerospace. DO NOT USE ANY OTHER CHEMICAL. DO NOT RINSE. Benefits:
  • Complete Green process
  • No Grinding or Blasting
  • No Rinsing
  • No EPA or OSHA regulation
  • Exceeeded Specification of Major companies (Goodrich Aerospace, Lockheed Marthin)
  • High Temperature Paint: Picklex® 20 can withstand around 2000°F. High temperature Paint/Coating can be used over Picklex® 20 coated surface.

Present Process:

  • Apply Alodine or Wash Primer with Chromate 
  • Remove excess
  • Air Dry
  • Paint

Picklex® 20 Process:

  • Spray Picklex® 20
  • Blow off excess with Air hose
  • Air Dry
  • Liquid Paint

Complete Surface preparation/Pre-treatment of Flash rusted steel”

Comparison between Traditional process and Picklex® 20 Process:

Present Process:

  • Apply Alodine or Wash PrimerWith Chromate (Toxic)
  • Blow off the excess product
  • Air Dry
  • Liquid Painting

Picklex® 20 Process:

  •  Apply Picklex® 20
  • Blow off the excess product
  • Air Dry
  • Liquid Paint

Benefits

Presented at National Hot Rod Magazine show in Huntsville, AL. April 1999

A picture of a car frame in a garage.
BEFORE (ORIGINAL CONDITION)
A car in a garage with tools on it.
AFTER POWDER COATING

Replacing Alodine & Wash Primer with Chromate

Eliminate Grinding/Sanding and the Cleaning chemicals from metal surface preparation before Painting with Picklex® 20 in One Step…

  • US EPA Tested/Verified, National Award & Edison Award winner

Performs complete Surface preparation & Pre-treatment in One Step as follows:

  • removes light mill oil, cutting fluid, surface rust …
  • provides a nano-thicknessconversion coating. Completely converts the mill scale on Hot rolled steel to a Weldable Conversion coating
  • Seals the coating and stops further oxidation

Benefits:

  • Complete Green Process
  • No Grinding/Sanding to remove surface rust, mill scale from Hot rolled steel with mill scale
  • No Rinsing
  • No EPA or OSHA regulation
  • Exceeds AWS and ASME code welding
  • Zero Weld failure (does not cause Hydrogen Embrittlement)
  • Anti-spatter

For more information, email us at rsen@icpi.net or call 256-650-0088

Complete Surface preparation/Pre-treatment of Flash rusted steel”

Comparison between Traditional process and Picklex® 20 Process:

Present Process:

  • Apply Alodine or Wash PrimerWith Chromate (Toxic)
  • Blow off the excess product
  • Air Dry
  • Liquid Painting

Picklex® 20 Process:

  •  Apply Picklex® 20
  • Blow off the excess product
  • Air Dry
  • Liquid Paint
Shopping Cart
Scroll to Top