The online store is under maintenance.
You may send your orders by sending us an email at:

Reliable Rust Inhibitor Available

Rust Removal & Rust Protection

Complete Surface preparation/Pre-treatment of Flash rusted steel

A before and after picture showing what a rust remover can do

Eliminate Blasting/Sanding/ Hazardous chemicals for Surface Rust/Mill scale removal and Long-term Indoor Rust protection with Picklex® 20 in One Step…

All Ferrous & Non-ferrous metals

— US EPA Tested/Verified, National Award & Edison Award winner

Performs Complete Surface preparation & Pre-treatment in One Step as follows:

  • removes light mill oil, cutting fluid, surface rust …
  • provides a nano-thicknessconversion coating. Completely converts mill scale on Hot rolled steel and pitted rust to a Conversion coating (no oxidation left on the surface)
  • Seals the coating and stops further oxidation


  • Complete Green Process
  • No Blasting or sanding for new metals including Hot rolled steel with mill scale
  • Completely removes surface rust and converts mill scale and pitted rust to a Conversion coating
  • Provides a rust/contamination free surface with Zero oxidation
  • Does not etch the metal surface, so the surface stays intact
  • Provides years of indoor Rust protection (more than 8 to 10 years)
  • No Rinsing
  • No EPA or OSHA regulation
  • The Picklex® 20 coating does not have to be removed for Welding & Painting

Comparison of the Traditional process and Picklex® 20 Process for Surface Rust Removal & Rust protection

Traditional Process:

Picklex® 20 Process: No Blasting/Sanding/Grinding needed

Traditional Process:

  • Blasting/Sanding/Grinding

  • Apply Rust Inhibitor for rust protection

Picklex® 20 Process:

  • Spray/Brush
  • Blow off the excess product

  • Air Dry
Shopping Cart
Scroll to Top