International Chemical Products, Inc.
Eliminate Blasting/Sanding Of New Metal Surface Before Welding, Liquid Painting & Powder Coating.
Eliminates Solvent, Acid, Phosphate, Chromates Etc. Before
Powder Coating, E-coating etc.
Eliminates the use of Alodine And wash primer with chromate.
Meets or Exceeds Specification/Quality Requirements
EPA Tested/Verified Product
No Rust problem.
No Indoor Rust Protection problem (more than 8 – 10 Years).
No Weld failure.
No Adhesion failure (even on edges & corners) since 1998.
LICENSING AVAILABLE
DISTRIBUTOR WANTED
Revolutionary Change in Metal Surface Preparation from Beginning to Finishing
EPA TESTED, AWARD WINNING, VALUE ADDED, WATER BASED, READY TO USE, NON-HAZARDOUS GREEN PRODUCT
ELIMINATES GRINDING/BLASTING ALONG WITH ALL HAZARDOUS/TOXIC CHEMICALS, SUCH AS SOLVENT, ACID, PHOSPHATE, CHROMATE ETC. FROM METAL SURFACE PREPARATION PROCESS IN METAL FABRICATION, STEEL CONSTRUCTION, FINISHING ETC.
WORKS ON HOT ROLLED STEEL WITHOUT REMOVING THE MILL SCALE
PREPARES THE SURFACE 100% RUST/CONTAMINATION FREE & STOPS THE OXIDATION PROCESS. PROVIDES YEARS OF INDOOR RUST PROTECTION
UNIT COST IS ONLY FEW CENTS PER SQ.FT. ZERO PRODUCT COST AFTER USE.
SOLVING ENVIRONMENTAL PROBLEMS. NO EPA OR OSHA REGULATION.
Complete Surface preparation/Pre-treatment of Flash rusted steel
Eliminating Blasting & Re-work from Metal Surface Preparation Process
Providing much better Welding than AWS and ASME Code Welding
Eliminate Removal of Mill Scale from Hot Rolled Steel & still achieve 1000 Hours of Salt spray test (ASTM B117) with two-part Epoxy Primer & Liquid Paint
Perform Liquid Painting, Powder Coating on Hot Rolled Steel without removing the mill scale
IMAGINE A PRODUCT THAT REDUCES LABOR, TIME & COST SO MUCH,
THAT YOU GET MORE THAN YOUR MONEY BACK AFTER USE!!!
Providing much better Welding than AWS and ASME Code Welding
Eliminate Removal of Mill Scale from Hot Rolled Steel & still achieve 1000 Hours of Salt spray test (ASTM B117) with two-part Epoxy Primer & Liquid Paint
Unique Zero Cost Green Product/Process for Complete One Step Metal Surface Preparation/Pre-treatment before Liquid Painting, Powder Coating, E-coating etc. with Zero Waste Disposal. Eliminates removal of Mill scale for Hot rolled steel (see process under About)
Replacing Acid/Iron/Zinc Phosphate/Chromate systems with Equal or Better-quality Results
REBAR COATING (Rust protection during storage & inside Concrete)
REPLACES ALODINE (Chromate Conversion Coating)
REPLACES WASH PRIMER WITH CHROMATE (exceeded 1000 hours of salt spray test)
REPLACES NITRIC ACID FROM STAINLESS STEEL PASSIVATION
KEEPING THE ENVIRONMENT CLEAN
COMPLETELY SOLVES ALL QUALITY PROBLEMS IN THE METAL INDUSTRIES SUCH AS, RUSTING PROBLEM, VERY LONG-TERM INDOOR RUST PROTECTION PROBLEM (FOR SEVERAL YEARS), WELDING & ADHESION FAILURES FOR ALL KIND OF METALS (FERROUS & NON-FERROUS)
Removes Surface Rust. Years of Indoor Rust Protection
Completely Prepares the metal surface Rust/contamination free for Welding, Priming, Liquid Painting, Electrostatic Painting, Powder Coating, E-coating and also for very High Temperature Paint and Coating (Epoxy, Ceramic coating etc.)
IMAGINE A PRODUCT THAT REDUCES LABOR, TIME & COST SO MUCH,
THAT YOU GET MORE THAN YOUR MONEY BACK AFTER USE!!!
Therefore, the Payback is immediately after using the Product
(With more money back, depending on how many steps are eliminated)
Vláda má na svém území jedny z nejoblíbenějších kasin na světě. V poslední době se však hazardní hry přesunuly na internet.
Proto je zapotřebí jiných metod, aby bylo možné kontrolovat jak hráče, tak příjmy a výdaje kasin. Kromě toho musí všechna kasina odvádět italskému státu poměrně vysokou daň.
V současné době existuje nařízení o online kasinech https://www.casinopointcz.com/, které stanoví pravidla odpovědného hraní, která musí mít, aby mohla být považována za kasina. Před uložením peněz do online kasina se ujistěte, že má licenci, v případě Itálie je to licence ADM. Regulace a dohled italské vlády jsou nezbytné, aby kasino bylo bezpečné a zodpovědné a dodržovalo herní předpisy.
ZERO PRODUCT COST AFTER USE
ZERO QUALITY FAILURE
By Eliminating one or more Traditional steps including Blasting & Re-work from Metal Surface Preparation Process
MADE IN USA
Complete Green Process
The Picklex® 20 Green Manufacturing Process results in zero waste disposal. The product reduces the welding and adhesion (bonding) failures to zero in the manufacturing/metal fabricating, construction processes, eliminating re-work.
Save Labor, Time, Cost & Energy
Saves a lot of conventional steps, labor, time, cost & energy (around 50% to over 80% depending on the number of applications). Product costs comes out to be few cents per sq. ft. of metal surface along with couple of minutes of labor time.
Award-Winning Technology
Picklex® 20 is the only pre-treatment (conversion coating) which can be brushed on a metal surface at room temperature without rinsing and completely removes the oxidation from the metal surface, provides a Conversion coating, Seals the coating and stops the oxidation process, all in One Step.
Testimonials
“Complete Surface Prep. of Flash Rusted Steel”
Testimonial from the Host of the TV Show “TRUCKS
Picklex® 20 used on the TV Show “TRUCKS”
