Replace Acid De-scaling/Pickling Process for Hot rolled steel/Heat treated metal with One Step Picklex® 20 De-scaling/coating process…
— US EPA Tested/Verified, National Award & Edison Award winner
Performs complete Surface preparation & Pre-treatment in One Step as follows:
- Performs complete De-scaling/de-rusting, Pickling, conditioning the metal, provide a Conversion coating, seal the coating in One Step
- Stops further oxidation
- Complete Green Process
- Performed at Room/Ambient temperature
- Does not etch the metal surface, so the surface stays intact
- Zero Waste Disposal
- No sludge
- No Rinsing
- No concentration adjustment
- No down time
- No EPA or OSHA regulation
- The coating provides years of indoor Rust Protection (more than 10 to 15 years)
Present Process
- Dipped in Acid
- Rinse
- apply light oil for rust protection
Picklex® 20 Process:
- Dip the Parts (no oil & completely Dry) in Picklex® 20 for 6 – 8 hours (or overnight) at Room/Ambient temperature
- Blow off excess with Air hose
- Air Dry
REBAR – Partially De-scaled/Coated with Picklex® 20
Hot Rolled Steel with mill scale De-scaled/Coated partially (bottom half) with Picklex® 20
For more information, email us at [email protected] or call 256-650-0088.
