E-coating
Replace your Zinc Phosphate system with 3-step Picklex® Process for E-coating …
Combined Surface Preparation & Pre-treatment (Conversion coating) in One Step
Provides 100% Clean surface & stops further oxidation before Finishing
— US EPA Tested/Verified, National Award & Edison Award winner
Performs complete Surface preparation & Pre-treatment in One Step as follows:
- removes light mill oil, cutting fluid, surface rust & weld/laser scale …
- provides a nano-thicknessconversion coating.
- Seals the coating and stops further oxidation
Benefits:
- Complete Green Process
- Zero Waste Disposal
- No sludge
- Rinse water is not a Hazardous waste
- No concentration adjustment (Picklex® does not Deplete)
- Provides a rust/contamination free surface with Zero oxidation
- No Waste treatment
- No down time
- No EPA or OSHA regulation
- Passed 1500 hours of Salt Spray Test (ASTM B117)
For more information, email us at [email protected] or call 256-650-0088.
Complete Surface preparation/Pre-treatment of Flash rusted steel
Comparison of Traditional Zinc Phosphate system with Picklex® Process before E-coating
Traditional Process: With Zinc Phosphate system
Present Process:
Rinsing
Rinsing
Acid Pickling
Rinsing
Rinsing
Activation
Zinc Phosphate
Rinsing
Sealer Rinse
Picklex® Process: Manual or Automated (spraying or dipping):
Picklex® 20 Process:
Picklex®/De-greaser
Rinse with regular Tap water (Rinse water is not a Hazardous Waste)
Rinse
E-coat
